 |
|
|
| Can’t Configure SModule ettings (United States) |
|
|
I have added the smart-thinker utilities module into a DNN 4.0.3 installation without moderation. When I click the settings link to configure the module the screen refreshes and I see nothing. How can I configure this module? |
|
|
|
 | |
|
|
| Re: Can’t Configure SModule ettings (N/A) |
|
|
Hello Tim
I had a look at this on your site and check the module definitions, URL etc. and it all seems fine. Where there any error messages when you installed the module?
Could you please try to install it again (don't uninstall old one - just reinstall).
And I meant to look at your LogViewer but when I tried to log in now I could not - can you go to the Settings page and then check your log and paste any errors here please. This should shed some light on it.
Thanks
Rodney
See our modules in action on PokerDIY, a social network for home poker players
 |
|
|
|
| |
|
|
| Re: Can’t Configure SModule ettings (United States) |
|
|
|
Rod,
Below is the log file for the recent module upload - no errors, but still not working. I am sending you my new password, so you can do some poking around. Has this been tested with DNN 4. |
|
| |
| StartJob |
Starting Installation |
| StartJob |
Reading files |
| Info |
Loading Settings.ascx |
| Info |
File Settings.ascx read successfully |
| Info |
Loading Utilities.ascx |
| Info |
File Utilities.ascx read successfully |
| Info |
Loading License.txt |
| Info |
File License.txt read successfully |
| Info |
Loading Installation.txt |
| Info |
File Installation.txt read successfully |
| Info |
Loading Version History.txt |
| Info |
File Version History.txt read successfully |
| Info |
Loading Module Config Guide.txt |
| Info |
File Module Config Guide.txt read successfully |
| Info |
Loading Roadmap.txt |
| Info |
File Roadmap.txt read successfully |
| Info |
Loading SmartThinker.DNN.Modules.Utilities.dll |
| Info |
File SmartThinker.DNN.Modules.Utilities.dll read successfully |
| Info |
Loading Smart-Thinker - Utilities.dnn |
| Info |
File Smart-Thinker - Utilities.dnn read successfully |
| Info |
Loading Settings.ascx.resx |
| Info |
File Settings.ascx.resx read successfully |
| Info |
Loading Utilities.ascx.resx |
| Info |
File Utilities.ascx.resx read successfully |
| EndJob |
Reading files done. |
| |
| StartJob |
Reading DNN file |
| Info |
DNN file is in valid 3.0 format. |
| Info |
... |
| Info |
Loading files info |
| Info |
Found valid path (App_LocalResources) for Utilities.ascx.resx. |
| Info |
Found valid path (App_LocalResources) for Settings.ascx.resx. |
| Info |
Found valid path (Documentation) for Installation.txt. |
| Info |
Found valid path (Documentation) for License.txt. |
| Info |
Found valid path (Documentation) for Module Config Guide.txt. |
| Info |
Found valid path (Documentation) for Roadmap.txt. |
| Info |
Found valid path (Documentation) for Version History.txt. |
| Info |
Loading Modules info |
| Info |
Loading Control info for 'Smart-Thinker - Utilities' module |
| EndJob |
Dnn load finished successfully |
| |
| StartJob |
Begin Sql execution |
| EndJob |
Finished Sql execution |
| |
| StartJob |
Creating files |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Utilities.ascx |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Settings.ascx |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\bin\SmartThinker.DNN.Modules.Utilities.dll |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\App_LocalResources\Utilities.ascx.resx |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\App_LocalResources\Settings.ascx.resx |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Documentation\Installation.txt |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Documentation\License.txt |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Documentation\Module Config Guide.txt |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Documentation\Roadmap.txt |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Documentation\Version History.txt |
| Info |
Created C:\Domains\wittstudio.com\wwwroot\DesktopModules\Smart-Thinker - Utilities\Smart-Thinker - Utilities.dnn |
| EndJob |
Files created |
| |
| StartJob |
Registering DesktopModule |
| Info |
Registering Definitions |
| Info |
Registering Controls |
| EndJob |
Registering finished |
| |
| Info |
|
| EndJob |
Installation successful. | | |
|
|
|
| |
|
|
| Re: Can’t Configure SModule ettings (United Kingdom) |
|
|
Yes, this works fine on DNN 4.3.
I had a look around and this is the error that is occuring when you try to view it (from your Log Viewer):
ModuleId: -1
ModuleDefId: -1
http://www.wittstudio.net/Contact/tabid/59/Default.aspx
ExceptionGUID: 8b9a7ae4-4f09-4413-b36c-1c82fc7fcc9d
DefaultDataProvider: DotNetNuke.Data.SqlDataProvider, DotNetNuke.SqlDataProvider
InnerException: Unhandled Error Adding Module to ContentPane
Message:
DotNetNuke.Services.Exceptions.ModuleLoadException: Unhandled Error
Adding Module to ContentPane ---> System.Web.HttpParseException:
Could not load file or assembly
'SmartThinker.DNN.Modules.ModuleFramework' or one of its dependencies.
The system cannot find the file specified. ---> System.Exception:
Could not load file or assembly
'SmartThinker.DNN.Modules.ModuleFramework' or one of its dependencies.
The system cannot find the file specified. --->
System.IO.FileNotFoundException: Could not load file or assembly
'SmartThinker.DNN.Modules.ModuleFramework' or one of its dependencies.
The system cannot find the file specified.
File name: 'SmartThinker.DNN.Modules.ModuleFramework' at
System.Reflection.Assembly.nLoad(AssemblyName fileName, String
codeBase, Evidence assemblySecurity, Assembly locationHint,
StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean
forIntrospection) at
System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean
forIntrospection) at System.Reflection.Assembly.InternalLoad(String
assemblyString, Evidence assemblySecurity, StackCrawlMark&
stackMark, Boolean forIntrospection) at
System.Reflection.Assembly.Load(String assemblyString) at
System.Web.Configuration.CompilationSection.LoadAssembly(String
assemblyName, Boolean throwOnFail) at
System.Web.UI.TemplateParser.LoadAssembly(String assemblyName, Boolean
throwOnFail) at
System.Web.UI.MainTagNameToTypeMapper.ProcessTagNamespaceRegistrationCore(TagNamespaceRegisterEntry
nsRegisterEntry) at
System.Web.UI.MainTagNameToTypeMapper.ProcessTagNamespaceRegistration(TagNamespaceRegisterEntry
nsRegisterEntry) at
System.Web.UI.BaseTemplateParser.ProcessDirective(String directiveName,
IDictionary directive) at
System.Web.UI.TemplateControlParser.ProcessDirective(String
directiveName, IDictionary directive) at
System.Web.UI.TemplateParser.ParseStringInternal(String text, Encoding
fileEncoding)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind
failure logging.
To turn this feature off, remove the registry value
[HKLM\Software\Microsoft\Fusion!EnableLog]. --- End of inner exception
stack trace --- at
System.Web.UI.TemplateParser.ProcessException(Exception ex) at
System.Web.UI.TemplateParser.ParseStringInternal(String text, Encoding
fileEncoding) at System.Web.UI.TemplateParser.ParseString(String text,
VirtualPath virtualPath, Encoding fileEncoding) --- End of inner
exception stack trace --- at
System.Web.UI.TemplateParser.ParseString(String text, VirtualPath
virtualPath, Encoding fileEncoding) at
System.Web.UI.TemplateParser.ParseFile(String physicalPath, VirtualPath
virtualPath) at System.Web.UI.TemplateParser.ParseInternal() at
System.Web.UI.TemplateParser.Parse() at
System.Web.Compilation.BaseTemplateBuildProvider.get_CodeCompilerType()
at
System.Web.Compilation.BuildProvider.GetCompilerTypeFromBuildProvider(BuildProvider
buildProvider) at
System.Web.Compilation.BuildProvidersCompiler.ProcessBuildProviders()
at System.Web.Compilation.BuildProvidersCompiler.PerformBuild() at
System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) at
System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean
allowBuildInPrecompile) at
System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean
allowCrossApp, Boolean allowBuildInPrecompile) at
System.Web.UI.TemplateControl.LoadControl(VirtualPath virtualPath) at
System.Web.UI.TemplateControl.LoadControl(String virtualPath) at
DotNetNuke.Modules.Admin.Modules.ModuleSettingsPage.Page_Init(Object
sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at
System.Web.UI.UserControl.OnInit(EventArgs e) at
System.Web.UI.Control.InitRecursive(Control namingContainer) at
System.Web.UI.Control.InitRecursive(Control namingContainer) at
System.Web.UI.Control.InitRecursive(Control namingContainer) at
System.Web.UI.Control.InitRecursive(Control namingContainer) at
System.Web.UI.Control.AddedControl(Control control, Int32 index) at
System.Web.UI.ControlCollection.Add(Control child) at
DotNetNuke.UI.Skins.Skin.InjectModule(Control objPane, ModuleInfo
objModule, PortalSettings PortalSettings) --- End of inner exception
stack trace ---
StackTrace:
Source:
Server Name: WINDU
Thanks
Rodney
See our modules in action on PokerDIY, a social network for home poker players
|
|
|
|
| |
|
|
| Re: Can’t Configure SModule ettings (United Kingdom) |
|
|
This looks like it is something to do with the ModuleFramework - there is a known problem with the other modules when an older version overwrites a newer version of the assembly.
To fix it - can you please install the latest Events module (1.0.5) - you do not have to use it, but this will copy the latest version of that assembly.
Let me know if this fixes it.
Thanks
Rodney
See our modules in action on PokerDIY, a social network for home poker players
|
|
|
|
| |
|
|
| Re: Can’t Configure SModule ettings (United States) |
|
|
| Rod, is it possible that installing the new module assembly will cause compatibility issues with other, currently installed, modules? |
|
|
|
| |
|
| |
| |
|
|
| Re: Can’t Configure Module Settings (United States) |
|
|
It worked Rod: brilliant- thank you |
|
|
|
| |
|
|
| Re: Can’t Configure SModule ettings (N/A) |
|
|
Hi Rodney,
I bought your modules a while back ...and just decide to use the Utilities module (Smart-Thinker - Utilities PA 01.00.00) on my DNN4.8.3 .
I see the same problem - when I go to the module settings the page is empty !
What can I do ?
Thanks Glen |
|
|
|
| |
|
| |
| |